Part No. | X5S-32TD |
Electronics specifications | |
Rated voltage | DC 24V |
Input allowed voltage rage | DC 20.4～28.8V |
Input current | 200mA（仅CPU，24VDC时） |
Surge current | 12A，28.8V DC时 |
fuse | 2A 60V |
Sensor voltage | L+ -1V |
24V power supply（Max） | 400mA |
5V power supply（Max） | 800mA |
Isolation（site and logic） | Non-isolation |
Stock specifications | |
Stock memory | 128K |
Data memory | ≥80K |
External stock | CPU do not support TF card，expansion by BD |
Ordinary Specifications | |
Timer total No.s | Total 512 PCS，260 PCS 1ms, 46 PCS10ms, 206 PCS100ms |
Counter | 256 PCS (include high speed counter） |
timer interrupt | Three 1 ms resolutions (recommended for use over 10 ms) |
Counter interrupt | 6 interrupt numbers |
Edge interrupt | 8 rising edges or 8 falling edges |
Analog potentiometer | None |
Real time clock | yes |
Card lot options | None |
Power down hold | yes |
Digital Input Specifications | |
Digital input build in | 16 points fixed |
Input type | PNP/NPN |
Rated Voltage | 24VDC，4mA |
Max allowed constant Voltage | 30V DC |
Surge Voltage | 35VDC，0.5S |
Logic1 (Mini) | Ordinary：when 15VDC，more than 2.5mA；high speed：when15VDC，more than 4mA |
Logic0 (Max) | Ordinary：when 5VD，less than1mA；high speed：when 5VDC，les than1.6mA |
Allowed leakage current(Max) | 1mA |
Isolation | Yes |
Photoelectric isolation | 500VAC 1min |
High speed counter input rate | Single phase 200KHz(4个)；AB Phase 100KHz(4PCS，include 1个5V difference ),Support 4x count |
Digital Output Specifications | |
Digital output build in | 16 0 (NPN) |
Output type | solid-MOSFET |
Rated Voltage | 24VDC |
Voltage range | 20.4～28.8VDC |
Surge Current（Max） | 8A，100ms |
Logic1（Mini） | 20VDC(at maximum current) |
Logic0（Max） | 0.1VDC，10 KΩ load |
Rated Current per point（Max） | 0.5A （Reuse design 0.2A） |
Rate Current per common terminal（Max） | 6A |
Leakage current[Max] | 10uA |
Lamp load[Max] | 5W |
Inductive insertion voltage | None |
Connecting resistance | 0.3 Ω typical value (maximum 0.6 Ω) |
Pulse frequency [maximum] | 4 channels：200KHz(Y0,Y1,Y2,Y3) |
Environmental relative humidity | 5～95%，No condensation (RH class 2, according to iec60068-2) |
Protection level | IP20 |
electromagnetic compatibility | Noise suppression, in accordance with iec61000-6-2 |
Mechanical grade (vibration) | Comply with iec61131-2 |
Grounding | DGrounding (grounding resistance: below 100 Ω) is not allowed to be grounded together with strong current system |
Working environment | No corrosive, combustible gas, conductive dust (dust) is not serious place |
Working height | Below 2000m (can't be used under the pressure above atmospheric pressure). Otherwise, there is a possibility of failure.) |
微博
