Item No. | Specifictions | |||||
Part No. | X2-32TD-E0 | |||||
Voltage | DC24V | |||||
Voltage range | DC 20.4~28.8V | |||||
Allowed voltage | continue to operate for the instantaneous power failure less than 5ms | |||||
Fuse | 60V 2A | |||||
Surge Current | 12A,0.5ms below/28.8V DC | |||||
Power consumption | 24W | |||||
DC24V power supply | 300mA below | |||||
DC5V internal power supply | 800mA below | |||||
Input specifications | ||||||
Input | 16 | |||||
Connection method | Detachable terminal block (M3 screw) | |||||
Input method | NPN/PNP | |||||
High speed counter | Single phase 200Khz(3PCS) AB phase 100Hz(3PCS) | |||||
Input signal voltage | DC power supply type: dc20.4v ~ 28.8v | |||||
Input impedance | X0-X5 | 3.3K | ||||
X6-X7 | 3.3K | |||||
X10 above | 5.6K | |||||
ONInput induced current | X0-X5 | More than 5mA | ||||
X6-X7 | More than 5mA | |||||
X10 above | More than 4mA | |||||
OFF Input induced current | 1mA below | |||||
Input response time | No more than 4.5ms | |||||
Input signal form | Voltage free contact input | |||||
Drain input: NPN open collector transistor | ||||||
Source type input:PNP,Open collector transistor | ||||||
Input circuit isolation | Optocoupler isolation | |||||
Display of input | When the optocoupler is driven, the LED light on the panel is on | |||||
Output specifications | ||||||
Output | 16 | |||||
Max frenquency | Singal end 2 Axis 200K | |||||
Connection method | Detachable terminal block (M3 screw) | |||||
Output method | NPN/PNP | |||||
External Power supply | DC5~30V | |||||
Max load | Resistive load | 0.5A/single point; | ||||
inductive load | 12W/DC24V | |||||
Light load | High speed:2W/DC24V、common:5W/DC24V | |||||
Min Load | 5mA(DC5~24V) | |||||
Open circuit leakage current | 0.1mA below /DC30V | |||||
Turn on resistance | High speed point 0.3Ω typical(Max0.6Ω) | |||||
response time | OFF→ON | High spend:5μs below/10mA above(DC5~24V) | ||||
Ordinary :0.2ms below/200mA above (DC24V) | ||||||
ON→OFF | High spend:5μs below/10mA above(DC5~24V) | |||||
Ordinary:0.2ms below/200mA above(DC24V) | ||||||
Loop isolation | Optocoupler isolation | |||||
Display of output action | When the optocoupler is driven, the LED light on the panel is on | |||||
Shield transmission distance | 500M(ordinary output) | |||||
Unshielded transmission distance | 150M(ordinary output) |